Good Support!
  Top » Catalog » Receiver » ..Receiver » RCPCORFUT24DY My Account  |  Cart Contents  |  Checkout |  LOGIN   
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Categories
!SAFE-PRODUCTS
Battery
BatteryAccessories (23)
BatteryCharger (43)
AutoAccessories-> (666)
Car (8)
CarBattery
CarBodys (11)
CarBrushlessMotor (20)
CarCombo (4)
CarESC (7)
CarTunning (15)
BEC RX REG (3)
CNC
Electromotor (21)
ElectromotorAccessories-> (215)
ELogger (15)
BoatAccessories-> (70)
BoatESC (8)
Boats
FPV-VideoTransmitters
AircraftESC (7)
Airplane-> (56)
NitroEnginesAccessories-> (90)
MULTICOPTERS
Helicopters (2)
HelicopterAccessories-> (431)
HelicopterESC (3)
HelicopterGyro (2)
HelicopterMotor (4)
HelicopterRotorblades (11)
Servo-> (102)
Accessories-> (492)
Fuel
Propellers-> (167)
Radio-> (28)
Receiver-> (264)
  ..Receiver (20)
  .TX Crystal 35-40Mhz (49)
  .Single Standard Crystal 35-40Mhz (29)
  .Single Micro Crystal 35-40Mhz (109)
  .Dual Crystal 35-40Mhz (57)
Simulators (8)
Vouchers
Specials more
PL1007 Flybar paddle for SJM400
PL1007 Flybar paddle for SJM400
680Ft
510Ft
Long snap pin M2 10 pcs MPJ2234
Long snap pin M2 10 pcs MPJ2234
790Ft
690Ft
Nanda OnRoad Car 1:12 NRX -12 PRO Brushless Sets
Nanda OnRoad Car 1:12 NRX -12 PRO Brushless Sets
219,990Ft
149,000Ft
Velcro 25mm x  5meter Blue New
Velcro 25mm x 5meter Blue New
3,500Ft
3,250Ft
AL1002 Servo mount for SJM400
AL1002 Servo mount for SJM400
1,865Ft
1,310Ft
Velcro 30mm x  5meter Yellow New
Velcro 30mm x 5meter Yellow New
4,500Ft
4,250Ft
HS1006 Tail rotor shaft & belt driven shaft for SJM400
HS1006 Tail rotor shaft & belt driven shaft for SJM400
813Ft
610Ft
Threaded Hexagon Socket Insert M4 bl 10pcs MPJ1135
Threaded Hexagon Socket Insert M4 bl 10pcs MPJ1135
3,390Ft
3,290Ft
Tell A Friend
 
Tell someone you know about this product.
.Corona 2.4ghz DIY(DSS) module 10,990Ft 9,990Ft
Out of stock

Type: Futaba Ì××°(DSSS)
Size: 58.5x37.5x22mm(2.3"x1.47"x0.86")
Weight: 29g
Operating voltage: 6V-13V
Operating current: 100mA
Output Power: <10mW
Resolution: 1024
Compatible with: FUTABA: 3PM/3PK/7U/ 8U/ 8J/ 9C / 9Z/ FN series.
HITEC: Optic 6/Eclipse 7. WFLY: WFT09 WFT08
Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.

Using the Corona 2.4GHz system
1. Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz adheres strictly to Frequency-Hopping Spread Spectrum (FHSS) communication standards by constantly switching across a wide band of frequencies. Combining Corona·¯s software with FHSS we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available.

Features of Corona 2.4GHz transmitting module and receiver The new lightweight, advanced technology unit has the following features:
1. Extended operating range 1.5 km range, which has been tested in a real flying environment.

2. A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.
3. One-key user friendly setup mode.

4. Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.

5. The unique receiver design makes the Corona module easy to install and ensures reliability.

6. Corona's advanced needle design ensures the lightest possible receiver
Transmitting and receiving communication setup

Installation of receivers
As the wave length of 2.4GHz is shorter, its ability to go around obstacles is weaker than receivers whose frequency is below the 100MHz .Therefore, when you install the antenna, you must avoid objects with high conductivity such as; metal parts, servos, ESC·¯s, battery, wires, and carbon fiber structures. If possible put the end of the antenna outside of the fuselage.

Receiver and Transmitter Setup Instructions
By following these steps you will ensure your transmitter and receiver are properly setup and ready to fly.
1. Turn the transmitter on and adjust your transmitter to PPM mode and then turn the transmitter off.
2. Press and hold the programming button on the transmitting module,turn the transmitter on,then you can release the button.(Attention: Not keep hold the button down over 3 seconds,or its ID will change randomly) The LED on Module will flash between red and green indicating the transmitter is ready to bind with the receiver.
3. Press and hold the button on the receiver and power the receiver on. The LED on the receiver will flash two times , indicating the receiver have recognized the transmitter. Turn off the transmitter and receiver.
4.Power on the receiver(s) without pressing any button,then power up the transmitter also without pressing button, the LED on the transmitter light yellow. The RF-link will normally connect in 15~20 seconds between transmitter and the receiver(s).If linked the LED on the receiver(s) will light red without any flash indicating the receiver(s) is operating properly. If the LED flashes sometime or does not light at all. Repeat this step until link is connected properly.

After set up receiver and transmitter,user only take the 4th step in normal flying.

We hope you enjoy your new 2.4 Ghz receiver and transmitter modules. They have been designed and produced using the highest quality control measures available. If you have any questions please do not hesitate to contact us or visit our website.

Range checking
This is necessary for safe operation and must be incorporated into your setup and pre-flight operations.

Failsafe setting for receiver
When RF linked between transmitter and receiver(LED on receiver light on,and all servos under controll)

Caution must be exercised when using the unit in an environment that consists of metal fences, concrete buildings, or rows of trees. In this environment you may experience unexpected radio wave multipath interference.

You must conduct a range check as follows (Note this is done with the receiver out of the plane):

1. Place the receivers at least two feet (60cm) above non-metal contaminated ground; for example a wooden bench.

2. Fix the antenna of receiver horizontally. Don·¯t let antenna touch the ground.

3. Connect a servo to channel one.

4. Place the antenna of the transmitter in a vertical position.
5. Turn on the transmitter and receiver and walk away from receiver while moving the stick which controls channel one. Ask someone to check the distance at which the servo doesn·¯t respond.

Attention: Controlling distance is greatly related to the transmitter power, please use freshly charged battery packs when you conduct the test. Controlling distance is affected by environment too. Please test it in the open away from any obstacles. The controlling distance in the air is greater than that on the ground. Our controlling range is based on a conservative ground test.

Specification:
Specification for the transmitter module CT8FD:
min typ max remark
Operating voltage range 6V 10V 13v Rely on the transmitter
Operating current 100mA
Resolution 10bit

 
Current Reviews: 2
This product was added to our catalog on Tuesday 22 July, 2014.
Reviews


Customers who bought this product also purchased
.RADIOLINK 2,4ghz vevõ 6ch
.RADIOLINK 2,4ghz vevõ 6ch
8,990Ft
6,990Ft
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
2,000Ft
1,500Ft
.XT60 Gold Connector FEMALE! 1DB
.XT60 Gold Connector FEMALE! 1DB
350Ft
300Ft
Feigai Standard Crystal Set 40Mhz 40.875 - 85ch
Feigai Standard Crystal Set 40Mhz 40.875 - 85ch
2,000Ft
1,500Ft
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
2,000Ft
1,500Ft
Feigai Standard Crystal Set 40Mhz 40.815 - 81ch
Feigai Standard Crystal Set 40Mhz 40.815 - 81ch
2,000Ft
1,500Ft
GWS 10 x 6,0 Direct Driver Propeller
GWS 10 x 6,0 Direct Driver Propeller
500Ft
450Ft
GWS 11 x 4,7 Slowfly propeller
GWS 11 x 4,7 Slowfly propeller
500Ft
450Ft
NANDA MA2072 Engine Mounting Plate Set
NANDA MA2072 Engine Mounting Plate Set
2,190Ft
2,090Ft
FUTABA Servo Y Leads standard 15cm LC GOLD
FUTABA Servo Y Leads standard 15cm LC GOLD
1,090Ft
990Ft
NANDA MA2074 Handle Bar
NANDA MA2074 Handle Bar
3,990Ft
3,890Ft
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
5,990Ft
4,990Ft
Locking Cable Ties 2,5 x 100 20 qty MPJ1620
Locking Cable Ties 2,5 x 100 20 qty MPJ1620
790Ft
690Ft
Y fuel line couplers small 2 pcs MPJ4152
Y fuel line couplers small 2 pcs MPJ4152
1,290Ft
1,190Ft
Fuel line locking rings small 4 pcs MPJ4142
Fuel line locking rings small 4 pcs MPJ4142
690Ft
590Ft
Fuel line plug small 2pcs MPJ4140
Fuel line plug small 2pcs MPJ4140
590Ft
490Ft
.Germany Quality Balsa sheet 4,0 x 93 x 100 mm
.Germany Quality Balsa sheet 4,0 x 93 x 100 mm
1,090Ft
650Ft
Apc Slowflyer 11 x  3,8
Apc Slowflyer 11 x 3,8
1,500Ft
1,290Ft
GWS  4,5 x 4,0 Direct Driver Propeller
GWS 4,5 x 4,0 Direct Driver Propeller
370Ft
320Ft
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
2,000Ft
1,500Ft
GWS  3 x 3,0 Direct Driver Propeller
GWS 3 x 3,0 Direct Driver Propeller
320Ft
270Ft
ShoppingCart more
0 items
Notifications more
Notifications
Notify me of updates to .Corona 2.4ghz DIY(DSS) module
Specials more
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
5,990Ft
4,990Ft
NANDA NH2034 Front Shock Tower(Carbon)
NANDA NH2034 Front Shock Tower(Carbon)
3,990Ft
3,890Ft
Threaded Hexagon Socket Insert M5 bl 10pcs MPJ1137
Threaded Hexagon Socket Insert M5 bl 10pcs MPJ1137
3,690Ft
3,590Ft
SJ20011 M2 x 12 Cap screws for SJM400 V2
SJ20011 M2 x 12 Cap screws for SJM400 V2
813Ft
610Ft
SJ10006 Bearing 3 x 6 x 2 for SJM400
SJ10006 Bearing 3 x 6 x 2 for SJM400
2,490Ft
2,390Ft
Metric Ball Bearings W/Shield D10 x d5 x B4 (1db)
Metric Ball Bearings W/Shield D10 x d5 x B4 (1db)
590Ft
490Ft
Apc Sport  7 x  6
Apc Sport 7 x 6
1,490Ft
1,390Ft
FG2008 Canopy mount for SJM400 V2
FG2008 Canopy mount for SJM400 V2
813Ft
300Ft
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!
Copyright © 2024 RCPANDA MODELSPORT