This is HiModel new waterproofing brushless motor speed controller for boats.
Featurers with '*' are only available for configuring via program box/card.
Waterproofing, speciall designed for boats application.
Can connect to programming box (with LCD display), easy to set up various parameters. (programming box not included)
Cell number selectable via program box from 2-5 cells for lipo, the cut-
off voltage of each cell can be set between 2.0-3.2V at 0.1V step.
The cut-off voltage for Ni-Mh/Cd battery is selectable from 0.4-
1.0V per cell at 0.1V step. *
Timing mode: 0-30° selectable at 1°step. *
3 PWM mode selectable for work with different motors,
8Khz/16Khz/32khz.
3 throttle curve modes: logarithmic, linear and exponential. *
3 accelerating modes: slow/medium/fast, together with the throttle
curve function will give you the idea throttle curve setting. *
Safely power on: it will not immediately start the motor regardless the
position of throttle when power on the ESC, avoid damageing to
people.
With reverse function, the reverse delay is adjustable. *
With forward/backward output limit function. *
Throttle range auto detect and also manually set to a fixed position. *
Over heat protection. 110℃.
Signal lost portection: it will shut off 3 seconds later since signal lost.
Specifications:
Weight: 45 g
Size: 52 x25 x12mm
Constant Current:70A
Max Current: 90A (for ten seconds)
FET: 48
BEC:NO
PWM: 8 KHz
Input: 2 to 5 Li-Po, or 6 to16 Ni-MH/Ni-Cd