Hyperion Diamond Carbon Helicopter Blades are made of pure carbon
cloth in a cured, hard diamond-glaze resin. As such, they are not
just beautiful, but also the stiffest, most precise blades you can
buy.

With maximum thickness of only 4.1 mm, the Hyperion Main Blades are
nearly 20% thinner than nearest competitor. The CG location of
the Hyperion blade compliments their stiffness and therefore there
is no "biting" during high-pitch maneuvers. You'll find that rpm
remains higher and current consumption lower with Hyperion
iamond Carbon blades.

These benefits are also found in the Tail Rotor Blades and Flybar
Paddles. Maintaining their shape at even the highest loads, and
producing less air resistance due to their thin profiles, adding these
components to your micro heli translates into the crispest, sharpest
3D maneuvers.

MAIN BLADES: (typically used with Trex 450 Heli)
19.15g each, 325mm total length, 317mm from pin to tip

TAIL ROTOR BLADES: (Fit most "400" Class Heli, Trex, Zoom, Etc)
1.03g each, 58mm total length, 54mm from pin to tip

FLYBAR PADDLES: (Fit most "400" Class Heli, Trex, Zoom, Etc)
5.34g each, 60mm total length, trailing edge 56mm long

NOTE: FlyBar paddles are threaded to fit standard flybar rods.
However, carbon is not an ideal material for small threads. As
such, once you have threaded the flybar paddles onto the flybar rod (degrease rod first), set pitch and apply a small drop of extra-thin
CA at the joint of paddle and rod. This wicks into the threads to
insure reliabilty. The paddle can still easily be removed by hand
afterwards.