Corona Dual Conversion FM - DSP-1024 vevő.
DSP computeres szűrés különlegessége hogy automatikusan
bekalibrálja magát a saját rádiónkhoz, megjegyezve a rádiónk
jelét görbéjét, s ezután ugyan ezen a csatornán megjelenő más
rádiók jelét kiszűri és figyelmen kivül hagyja !
Ez az új generációs DSP már 4 szeres szűréssel rendelkezik és a futaba vevőkhöz hasonlóan 1024 felbontású. Rákapcsolási hibák jelentős lecsökkentése vagy teljes kiszűrése !
Rákapcsolás esetén csak minimális szervó zizegés lép fel, de irányítható
marad a repülőnk. Teljes hatótávú vevő igen jó érzékenységgel !
Védő csomagolásban !
Mindegyik távirányítóhoz használható ( Futaba/Hitec/JR/Airtronics/Graupner )
Failsafe funkcióval ellátva, adó kihagyás esetén nem zizeg :)
Méret: 35x21.5x7.8mm
Súly: 8.4g
Érzékenység: <=2.0uV

Kristály: Corona HC50U Dual conversion standard kristály !

Hatótáv földön: 1,8 KM

Csatornaszám: 8
Felbontás: 1024
Selectivity ±8kHz at 65dB down
Filtering Dual turned RF circuitry
Filtering Dual 4 element ceramic filter
Filtering DSP filtering in MCU with mild algorithm
Shift polarity positive or negative (auto-detect)
Modulate FM/PPM(pulse position modulation)
Operating Voltage 4.8V~6.0VDC
Operating Current 11mA

Nagyon könnyű vevő csak 8,4gram, teljes hatótávú ultra érzékeny
Dual konverziós vevő. Microprocesszoros dekódolás felbontása pedig 1024 !
Jelen pillanatban a legmodernebb vevő technika ami magában
foglalja a dual konverzió adta lehetőségeket amit párosít a korszerű
DSP technológiával a kettő együtt összehasonlításként bőven megfelel
egy Futaba dual konverziós rendszer adta profizmusnak !
Használható 3D CCPM helikopterekhez, 3D fix wing repcsikhez,
park flyerekhez, slowflyerekhez, gliderekhez, LARGE SCALE NAGY
GÉPEKHEZ és emelett garantáltan védi a repülés élményét.

Hatótáv teszt:

Futaba T14MZ rádió teljesen betolt antennával
esőben, panelházak között autók és buszforgalom
alatt 90méter ! Csinálunk még reptéri tesztet is, de
már most úgy néz ki felveszi a versenyt a
nagy futaba PCM vevőkkel 148DP,149DP.
A kisebb futaba PCM vevőt 146IP-t vagy itthon megszokott
egyébb közép kategóriás vagy olcsóbb márkákat pedig agyonveri árértékben is és teljesítményben is ! ! ! :)

Among Corona receivers, from crystal receivers to synthesized ones,
from single conversion receivers to dual conversion ones, from 4ch
to 8ch, there must be one type suit for you.
DUAL Conversion Receiver
RS620II Receiver
CORONA never stops improving the receiving range. RD620II has
improved the receiving range as far as 1.8Km (checking range on
ground). If we use traditional technology, how big the receiver
should be made to reach such a far receiving range?
Dual conversion receiver can eliminate mirror frequency interference
efficiently. Usually single conversion receiver uses IF of 455MHz,
and there is 1MHz bandwidth of RF frequency (72.010MHz-
72.990MHz). 0.445*2=0.910MHz, so if the transmitters of
72.010MHz and 72.910MHz (or 72.930MHz) turn on at the same
time, single conversion receivers will be interfered from each
other. While dual conversion receiver uses IF of 10.7MHz, so RF
frequency of 1MHz bandwidth will not happen mirror frequency
interference.
Further remote control distance means more reliable control. Even the
reliability can compare beauty with PCM receiver. PCM receiver
has good reliability because it uses CRC code to fill up the wrong
codes which leading by shortage of receiving range. The signal will
always seem to be fine ostensibly, but CRC code of PCM began to
fill up “bad data cavity” which happens at times while exceeding
half of the distance described by manufacturer. PCM code wastes
a lot of time to receive more data to fill up the cavity of “bad
data”. So usually we feel that PCM receiver has no glitch, while its
response speed is less than PPM receiver.
We make control distance be further so that receiver can locate in
stable RF Electromagnetic Field, it will make the reliability of
Corona receiver approach to PCM receiver. Meanwhile, its
response speed will not be influenced.
With improved circuit design, RD620II advances IP3 performance
apparently, and it can even compare beauty with all famous brand
receivers around the world. IP3 performance of a receiver is vital
for serried R/C transmitters working at the same place. A receiver
with lower IP3 will still working fine when 1-2 transmitter with
adjacent channel working in the same time, but once open the
third adjacent channel transmitter, the receiver will lose control
immediately if it has poor IP3 performance.
The light weight and small size of RD620II predominate in other
receivers. Furthermore, we have moved the crystals of RD620II
to side face, which really improves the reliability of replacing
crystals.
We have also improved DSP. It can make more strictly filter about
received signals and eliminate glitch efficiently.
You can put RD620II receiver in any place when you install it on
whatever electric puddle-plane, 3D plane, glider or training plane.
And don't worry the trouble which will be brought by changing CG.
Strong reliability and anti-interference performance make RD620II
receiver especially adapt to work with electric helicopter which flies
at bad electromagnetic environment. RD620II can work well even
near high power motor (similar to TREX600CF) and 100A pulse
current interference.
RD620II receiver has the structure of level inserted pin by special
design and assorted with super thin electronic parts. The thickness
of RD620II receiver is only 7.2mm which make the installation
more convenient.
Reliability, high performance and sale price, they are what CORONA can
provide for you.