Gyere be jó lesz!
  Főoldal » Katalógus » Vevő » ..Vevők » RCPCORFUT24DY Személyes beállítások  |  Kosár tartalma  |  Pénztár   
Gyorskeresés
 
Keresett termék neve.
Összetett keresés
Kategóriák
KÖNYV
AkkuKiegészítők (20)
Akkumulátor (8)
AkkuTöltő (48)
Autó (5)
AutóAkkuk (1)
AutóAlkatrész-> (664)
AutóCombo (4)
AutóElektromotor (19)
AutóKasznik (12)
AutóSzabályzók (6)
AutóTunning (13)
BEC RX REG (3)
CNC (7)
Elektromotor (18)
ElektromotorAlkatrész-> (248)
ELogger (14)
FPV-VideóÁtvitel (21)
Hajó
HajóAlkatrészek-> (54)
HajóSzabályzók (8)
Repülő-> (63)
RepülőSzabályzók (7)
RobbanómotorokKiegészítők-> (72)
MULTICOPTEREK
Helikopterek (2)
HelikopterAlkatrészek-> (420)
HelikopterElektromotor (4)
HelikopterGyro (3)
HelikopterRotorlapátok (11)
HelikopterSzabályzók (3)
Szervó-> (92)
Kiegészítők-> (373)
Légcsavarok-> (169)
Üzemanyag
Távirányító-> (23)
Vevő-> (253)
  ..Vevők (15)
  .Adó Kristály 35-40Mhz (36)
  .Single Standard Kristály 35-40Mhz (24)
  .Single Micro Kristály 35-40Mhz (117)
  .Dual Kristály 35-40Mhz (61)
Szimulatorok (7)
Utalványok
Információk
Szállítás és garancia
Adatkezelés
Használat szabályai
Kapcsolat
Újdonságok tovább
..Hacker A30 - Glider Conversion Kit
..Hacker A30 - Glider Conversion Kit
4,990Ft
3,710Ft
Akciók.... tovább
Apc Pylon  6.5 x 6.0
Apc Pylon 6.5 x 6.0
1,490Ft
1,110Ft
TowerPro SG-50 / SG-51 Mini Servo Fogaskerék Szett TowerPro
TowerPro SG-50 / SG-51 Mini Servo Fogaskerék Szett TowerPro
546Ft
410Ft
Kábel snapper szett  MPJ2301
Kábel snapper szett MPJ2301
413Ft
310Ft
BlueArrow MicroCrystal 40Mhz 40.670 - 67ch
BlueArrow MicroCrystal 40Mhz 40.670 - 67ch
946Ft
710Ft
PL2003 Tail drive gear set for SJM400
PL2003 Tail drive gear set for SJM400
946Ft
710Ft
Beépíthető M2,5 anya 10db MPJ1003
Beépíthető M2,5 anya 10db MPJ1003
680Ft
510Ft
13 Fogú Fogaskerék 3,2mm Motortengelyre Mod 0,6 ID
13 Fogú Fogaskerék 3,2mm Motortengelyre Mod 0,6 ID
1,290Ft
910Ft
AL1041 Horse beam for SJM400
AL1041 Horse beam for SJM400
1,146Ft
810Ft
.Szivacs Kerék 36(DIA) H7mm Ultra könnyű és vékony 1 PÁR
.Szivacs Kerék 36(DIA) H7mm Ultra könnyű és vékony 1 PÁR
729Ft
510Ft
Graupner G-Sonic 1318.40.30 16x12
Graupner G-Sonic 1318.40.30 16x12
3,080Ft
2,310Ft
Ajánlja a lapunkat
 
Ajánlja a lapunkat.
.Corona 2.4ghz DIY(DSS) module
[RCPCORFUT24DY]
10,990Ft 9,990Ft
Raktáron

Type: Futaba Ě××°(DSSS)
Size: 58.5x37.5x22mm(2.3"x1.47"x0.86")
Weight: 29g
Operating voltage: 6V-13V
Operating current: 100mA
Output Power: <10mW
Resolution: 1024
Compatible with: FUTABA: 3PM/3PK/7U/ 8U/ 8J/ 9C / 9Z/ FN series.
HITEC: Optic 6/Eclipse 7. WFLY: WFT09 WFT08
Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.

Using the Corona 2.4GHz system
1. Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz adheres strictly to Frequency-Hopping Spread Spectrum (FHSS) communication standards by constantly switching across a wide band of frequencies. Combining CoronaˇŻs software with FHSS we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available.

Features of Corona 2.4GHz transmitting module and receiver The new lightweight, advanced technology unit has the following features:
1. Extended operating range 1.5 km range, which has been tested in a real flying environment.

2. A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.
3. One-key user friendly setup mode.

4. Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.

5. The unique receiver design makes the Corona module easy to install and ensures reliability.

6. Corona's advanced needle design ensures the lightest possible receiver
Transmitting and receiving communication setup

Installation of receivers
As the wave length of 2.4GHz is shorter, its ability to go around obstacles is weaker than receivers whose frequency is below the 100MHz .Therefore, when you install the antenna, you must avoid objects with high conductivity such as; metal parts, servos, ESCˇŻs, battery, wires, and carbon fiber structures. If possible put the end of the antenna outside of the fuselage.

Receiver and Transmitter Setup Instructions
By following these steps you will ensure your transmitter and receiver are properly setup and ready to fly.
1. Turn the transmitter on and adjust your transmitter to PPM mode and then turn the transmitter off.
2. Press and hold the programming button on the transmitting module,turn the transmitter on,then you can release the button.(Attention: Not keep hold the button down over 3 seconds,or its ID will change randomly) The LED on Module will flash between red and green indicating the transmitter is ready to bind with the receiver.
3. Press and hold the button on the receiver and power the receiver on. The LED on the receiver will flash two times , indicating the receiver have recognized the transmitter. Turn off the transmitter and receiver.
4.Power on the receiver(s) without pressing any button,then power up the transmitter also without pressing button, the LED on the transmitter light yellow. The RF-link will normally connect in 15~20 seconds between transmitter and the receiver(s).If linked the LED on the receiver(s) will light red without any flash indicating the receiver(s) is operating properly. If the LED flashes sometime or does not light at all. Repeat this step until link is connected properly.

After set up receiver and transmitter,user only take the 4th step in normal flying.

We hope you enjoy your new 2.4 Ghz receiver and transmitter modules. They have been designed and produced using the highest quality control measures available. If you have any questions please do not hesitate to contact us or visit our website.

Range checking
This is necessary for safe operation and must be incorporated into your setup and pre-flight operations.

Failsafe setting for receiver
When RF linked between transmitter and receiver(LED on receiver light on,and all servos under controll)

Caution must be exercised when using the unit in an environment that consists of metal fences, concrete buildings, or rows of trees. In this environment you may experience unexpected radio wave multipath interference.

You must conduct a range check as follows (Note this is done with the receiver out of the plane):

1. Place the receivers at least two feet (60cm) above non-metal contaminated ground; for example a wooden bench.

2. Fix the antenna of receiver horizontally. DonˇŻt let antenna touch the ground.

3. Connect a servo to channel one.

4. Place the antenna of the transmitter in a vertical position.
5. Turn on the transmitter and receiver and walk away from receiver while moving the stick which controls channel one. Ask someone to check the distance at which the servo doesnˇŻt respond.

Attention: Controlling distance is greatly related to the transmitter power, please use freshly charged battery packs when you conduct the test. Controlling distance is affected by environment too. Please test it in the open away from any obstacles. The controlling distance in the air is greater than that on the ground. Our controlling range is based on a conservative ground test.

Specification:
Specification for the transmitter module CT8FD:
min typ max remark
Operating voltage range 6V 10V 13v Rely on the transmitter
Operating current 100mA
Resolution 10bit

 
Termékismertető: 2
Termék beszállítási dátuma 2014 július 22, kedd.
Ide kattintva olvashatja mások véleményét a termékről


Ehhez a termékhez az alábbi termékeket vásárolták meg
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
2,013Ft
1,510Ft
Feigai Standard Kristály Szett 40Mhz 40.815 - 81ch
Feigai Standard Kristály Szett 40Mhz 40.815 - 81ch
2,013Ft
1,510Ft
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
1,880Ft
1,410Ft
Feigai Standard Kristály Szett 40Mhz 40.875 - 85ch
Feigai Standard Kristály Szett 40Mhz 40.875 - 85ch
2,013Ft
1,510Ft
Feigai Standard Kristály Szett 40Mhz 40.865 - 84ch
Feigai Standard Kristály Szett 40Mhz 40.865 - 84ch
2,013Ft
1,510Ft
GWS 10 x 6,0 Direct Driver Propeller
GWS 10 x 6,0 Direct Driver Propeller
280Ft
210Ft
Himodel Futaba Standard HC-50 Vevő Kristály 35Mhz 35.030 - 63ch
Himodel Futaba Standard HC-50 Vevő Kristály 35Mhz 35.030 - 63ch
1,480Ft
1,110Ft
GWS 11 x 4,7 Slowfly légcsavar
GWS 11 x 4,7 Slowfly légcsavar
413Ft
310Ft
NANDA MA2074 Handle Bar
NANDA MA2074 Handle Bar
2,946Ft
2,210Ft
NANDA MA2072 Engine Mounting Plate Set
NANDA MA2072 Engine Mounting Plate Set
1,613Ft
1,210Ft
FUTABA Szervó Y kábel standard 15cm LC GOLD
FUTABA Szervó Y kábel standard 15cm LC GOLD
547Ft
410Ft
Hyperion LBA10 Balancerhez Univerzális adapter 2s-6s packokhoz Align,Himodel,Redmax(Kábel nélkül
Hyperion LBA10 Balancerhez Univerzális adapter 2s-6s packokhoz Align,Himodel,Redmax(Kábel nélkül
1,746Ft
1,310Ft
.Brushless szabályzó Program Card HobbyWing Pentium, TURNIGY
.Brushless szabályzó Program Card HobbyWing Pentium, TURNIGY
2,906Ft
2,110Ft
Kábel kötegelő 2,5 x 100 20 db MPJ1620
Kábel kötegelő 2,5 x 100 20 db MPJ1620
146Ft
110Ft
Y elágazó szilikoncsőhöz kicsi 2 db MPJ4152
Y elágazó szilikoncsőhöz kicsi 2 db MPJ4152
413Ft
310Ft
Fuel line locking rings small 4 pcs MPJ4142
Fuel line locking rings small 4 pcs MPJ4142
280Ft
210Ft
Fuel line plug small 2pcs MPJ4140
Fuel line plug small 2pcs MPJ4140
146Ft
110Ft
.Német Minőségi Balsafa lap 4,0 x 93 x 100 mm
.Német Minőségi Balsafa lap 4,0 x 93 x 100 mm
1,090Ft
890Ft
Apc Slowflyer 11 x  3,8
Apc Slowflyer 11 x 3,8
1,500Ft
1,110Ft
Gömbfej M3 rövid 6db MPJ2451
Gömbfej M3 rövid 6db MPJ2451
680Ft
510Ft
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
2,013Ft
1,510Ft
Belépés/Login:
BELÉPÉS

ÚJ Regisztráció
Bevásárlókosár tovább
0 cikk
Elérhetőségeink:
Packinfo:
Tel:+36-30-9210009
H-V: 10-18:00
Facebook
Nyelvek
HungarianEnglish
Pénznemek
Értesítések tovább
Értesítések
Értesítés a frissítésekről .Corona 2.4ghz DIY(DSS) module
Akciók.... tovább
.Brushless szabályzó Program Card HobbyWing Pentium, TURNIGY
.Brushless szabályzó Program Card HobbyWing Pentium, TURNIGY
2,906Ft
2,110Ft
M2 Gold Plated Spring
M2 Gold Plated Spring
280Ft
210Ft
AL1029 Canopy fixing for SJM400
AL1029 Canopy fixing for SJM400
417Ft
310Ft
CO1001 Copper ingot for SJM400
CO1001 Copper ingot for SJM400
680Ft
510Ft
NANDA NH2034 Front Shock Tower(Carbon)
NANDA NH2034 Front Shock Tower(Carbon)
3,080Ft
2,310Ft
Metric Ball Bearings W/Shield D 9 x d3 x B2.5 (4db)
Metric Ball Bearings W/Shield D 9 x d3 x B2.5 (4db)
1,346Ft
1,010Ft
UGL35 Elevator Lever Shaft
UGL35 Elevator Lever Shaft
1,213Ft
910Ft
TREX Farokrotor kihajtás szett HS1013-1
TREX Farokrotor kihajtás szett HS1013-1
2,280Ft
1,710Ft
Apc Pylon  6.5 x 6.0
Apc Pylon 6.5 x 6.0
1,490Ft
1,110Ft
AL1013 Tail rotor set for SJM400
AL1013 Tail rotor set for SJM400
4,573Ft
3,410Ft
Ajánlja a lapunkat
 
Ajánlja a lapunkat.
Vélemények tovább
.Corona 2.4ghz DIY(DSS) module
ez a dolog nagyon érdekel, de sajnos csak később tudom megve ..
5 az 5 csillagból!

Copyright © 2018 RCPANDA MODELSPORT
Powered by osCommerce