Gyere be jó lesz!
  Top » Catalog » Receiver » ..Receiver » RCPCORFUT24DY My Account  |  Cart Contents  |  Checkout   
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Categories
Book
Battery (8)
BatteryAccessories (21)
BatteryCharger (43)
AutoAccessories-> (698)
Car (5)
CarBattery (1)
CarBodys (12)
CarBrushlessMotor (18)
CarCombo (4)
CarESC (7)
CarTunning (14)
BEC RX REG (3)
CNC (7)
Electromotor (21)
ElectromotorAccessories-> (218)
ELogger (15)
BoatAccessories-> (51)
BoatESC (8)
Boats
FPV-VideoTransmitters (21)
AircraftESC (7)
Airplane-> (62)
NitroEnginesAccessories-> (60)
MULTICOPTERS
Helicopters (2)
HelicopterAccessories-> (429)
HelicopterESC (3)
HelicopterGyro (2)
HelicopterMotor (4)
HelicopterRotorblades (10)
Servo-> (102)
Accessories-> (341)
Fuel
Propellers-> (169)
Radio-> (27)
Receiver-> (259)
  ..Receiver (15)
  .TX Crystal 35-40Mhz (49)
  .Single Standard Crystal 35-40Mhz (29)
  .Single Micro Crystal 35-40Mhz (109)
  .Dual Crystal 35-40Mhz (57)
Simulators (8)
Voucher
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
What's New? more
GAUI 15T PINION GEAR 901503
GAUI 15T PINION GEAR 901503
1,490Ft
Specials more
SJ10002 Bearing 10 x 15 x 4 for SJM400
SJ10002 Bearing 10 x 15 x 4 for SJM400
1,347Ft
1,010Ft
AL1026 Flybar mixing arm for SJM400
AL1026 Flybar mixing arm for SJM400
698Ft
510Ft
Graupner Cam Prop Sport 1360.25.10 25/10cm 10/4
Graupner Cam Prop Sport 1360.25.10 25/10cm 10/4
1,346Ft
1,010Ft
10 Teeth Pinion Gear For 3,2mm Shaft Mod 0,6 ID
10 Teeth Pinion Gear For 3,2mm Shaft Mod 0,6 ID
1,290Ft
910Ft
BlueArrow MicroCrystal 40Mhz 40.710 - 71ch
BlueArrow MicroCrystal 40Mhz 40.710 - 71ch
946Ft
710Ft
SJ10001 One-way bearing 3 x 6,5 x 6 for SJM400
SJ10001 One-way bearing 3 x 6,5 x 6 for SJM400
1,747Ft
1,310Ft
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
2,906Ft
990Ft
Himodel Pushing Prop 4,0 x 3,0
Himodel Pushing Prop 4,0 x 3,0
280Ft
210Ft
Graupner Cam Folding Prop 1335.40.33 40/33cm - 16/13
Graupner Cam Folding Prop 1335.40.33 40/33cm - 16/13
9,480Ft
7,110Ft
AL1029 Canopy fixing for SJM400
AL1029 Canopy fixing for SJM400
417Ft
310Ft
Tell A Friend
 
Tell someone you know about this product.
.Corona 2.4ghz DIY(DSS) module
[RCPCORFUT24DY]
10,990Ft 9,990Ft
In stock

Type: Futaba Ě××°(DSSS)
Size: 58.5x37.5x22mm(2.3"x1.47"x0.86")
Weight: 29g
Operating voltage: 6V-13V
Operating current: 100mA
Output Power: <10mW
Resolution: 1024
Compatible with: FUTABA: 3PM/3PK/7U/ 8U/ 8J/ 9C / 9Z/ FN series.
HITEC: Optic 6/Eclipse 7. WFLY: WFT09 WFT08
Instruction Manual
Corona 2.4GHz Radio Control System
Thank you for purchasing our Corona 2.4Ghz RF transmitter module & receiver. In order to fully utilize the performance potential of this system, we suggest you first read the manual.

Using the Corona 2.4GHz system
1. Our new Corona 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years. The software designed exclusively for the transmitting module and receiver instantly locates and assigns safe and protected channels. Other flyers in the area can not create interference that normally would corrupt transmitter signals. The Corona 2.4GHz adheres strictly to Frequency-Hopping Spread Spectrum (FHSS) communication standards by constantly switching across a wide band of frequencies. Combining CoronaˇŻs software with FHSS we have designed a transmitter and receiver capable of providing modelers the highest performing radio system available.

Features of Corona 2.4GHz transmitting module and receiver The new lightweight, advanced technology unit has the following features:
1. Extended operating range 1.5 km range, which has been tested in a real flying environment.

2. A 3dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal.
3. One-key user friendly setup mode.

4. Perfect receiver antennas guarantee the plane receives the signal regardless of the maneuver or attitude.

5. The unique receiver design makes the Corona module easy to install and ensures reliability.

6. Corona's advanced needle design ensures the lightest possible receiver
Transmitting and receiving communication setup

Installation of receivers
As the wave length of 2.4GHz is shorter, its ability to go around obstacles is weaker than receivers whose frequency is below the 100MHz .Therefore, when you install the antenna, you must avoid objects with high conductivity such as; metal parts, servos, ESCˇŻs, battery, wires, and carbon fiber structures. If possible put the end of the antenna outside of the fuselage.

Receiver and Transmitter Setup Instructions
By following these steps you will ensure your transmitter and receiver are properly setup and ready to fly.
1. Turn the transmitter on and adjust your transmitter to PPM mode and then turn the transmitter off.
2. Press and hold the programming button on the transmitting module,turn the transmitter on,then you can release the button.(Attention: Not keep hold the button down over 3 seconds,or its ID will change randomly) The LED on Module will flash between red and green indicating the transmitter is ready to bind with the receiver.
3. Press and hold the button on the receiver and power the receiver on. The LED on the receiver will flash two times , indicating the receiver have recognized the transmitter. Turn off the transmitter and receiver.
4.Power on the receiver(s) without pressing any button,then power up the transmitter also without pressing button, the LED on the transmitter light yellow. The RF-link will normally connect in 15~20 seconds between transmitter and the receiver(s).If linked the LED on the receiver(s) will light red without any flash indicating the receiver(s) is operating properly. If the LED flashes sometime or does not light at all. Repeat this step until link is connected properly.

After set up receiver and transmitter,user only take the 4th step in normal flying.

We hope you enjoy your new 2.4 Ghz receiver and transmitter modules. They have been designed and produced using the highest quality control measures available. If you have any questions please do not hesitate to contact us or visit our website.

Range checking
This is necessary for safe operation and must be incorporated into your setup and pre-flight operations.

Failsafe setting for receiver
When RF linked between transmitter and receiver(LED on receiver light on,and all servos under controll)

Caution must be exercised when using the unit in an environment that consists of metal fences, concrete buildings, or rows of trees. In this environment you may experience unexpected radio wave multipath interference.

You must conduct a range check as follows (Note this is done with the receiver out of the plane):

1. Place the receivers at least two feet (60cm) above non-metal contaminated ground; for example a wooden bench.

2. Fix the antenna of receiver horizontally. DonˇŻt let antenna touch the ground.

3. Connect a servo to channel one.

4. Place the antenna of the transmitter in a vertical position.
5. Turn on the transmitter and receiver and walk away from receiver while moving the stick which controls channel one. Ask someone to check the distance at which the servo doesnˇŻt respond.

Attention: Controlling distance is greatly related to the transmitter power, please use freshly charged battery packs when you conduct the test. Controlling distance is affected by environment too. Please test it in the open away from any obstacles. The controlling distance in the air is greater than that on the ground. Our controlling range is based on a conservative ground test.

Specification:
Specification for the transmitter module CT8FD:
min typ max remark
Operating voltage range 6V 10V 13v Rely on the transmitter
Operating current 100mA
Resolution 10bit

 
Current Reviews: 2
This product was added to our catalog on Tuesday 22 July, 2014.
Reviews


Customers who bought this product also purchased
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.050 - 65ch
2,013Ft
1,510Ft
.XT60 Gold Connector FEMALE! 1DB
.XT60 Gold Connector FEMALE! 1DB
350Ft
300Ft
Feigai Standard Crystal Set 40Mhz 40.875 - 85ch
Feigai Standard Crystal Set 40Mhz 40.875 - 85ch
2,013Ft
1,510Ft
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
Corona UM-5 Single Conversion MicroCrystal 35Mhz 35.090 - 69ch
1,880Ft
1,410Ft
Feigai Standard Crystal Set 40Mhz 40.815 - 81ch
Feigai Standard Crystal Set 40Mhz 40.815 - 81ch
2,013Ft
1,510Ft
GWS 10 x 6,0 Direct Driver Propeller
GWS 10 x 6,0 Direct Driver Propeller
280Ft
210Ft
GWS 11 x 4,7 Slowfly propeller
GWS 11 x 4,7 Slowfly propeller
413Ft
210Ft
NANDA MA2072 Engine Mounting Plate Set
NANDA MA2072 Engine Mounting Plate Set
1,613Ft
1,210Ft
FUTABA Servo Y Leads standard 15cm LC GOLD
FUTABA Servo Y Leads standard 15cm LC GOLD
547Ft
410Ft
NANDA MA2074 Handle Bar
NANDA MA2074 Handle Bar
2,946Ft
2,210Ft
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
.Brushless controller Program Card HobbyWing Pentium, TURNIGY
2,906Ft
990Ft
Locking Cable Ties 2,5 x 100 20 qty MPJ1620
Locking Cable Ties 2,5 x 100 20 qty MPJ1620
146Ft
110Ft
Fuel line locking rings small 4 pcs MPJ4142
Fuel line locking rings small 4 pcs MPJ4142
280Ft
210Ft
Y fuel line couplers small 2 pcs MPJ4152
Y fuel line couplers small 2 pcs MPJ4152
413Ft
310Ft
Apc Slowflyer 11 x  3,8
Apc Slowflyer 11 x 3,8
1,500Ft
1,110Ft
.Germany Quality Balsa sheet 4,0 x 93 x 100 mm
.Germany Quality Balsa sheet 4,0 x 93 x 100 mm
1,090Ft
770Ft
BlueBird Futaba Standard HC-50 TX Crystal 35Mhz 35.140 - 74ch
BlueBird Futaba Standard HC-50 TX Crystal 35Mhz 35.140 - 74ch
1,480Ft
1,110Ft
GWS  4,5 x 4,0 Direct Driver Propeller
GWS 4,5 x 4,0 Direct Driver Propeller
280Ft
210Ft
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
Corona HC-50U Dual Conversion Crystal 35Mhz 35.140 - 74ch
2,013Ft
1,510Ft
GWS  3 x 3,0 Direct Driver Propeller
GWS 3 x 3,0 Direct Driver Propeller
280Ft
210Ft
Large FLEX hinge 12 pcs MPJ2515
Large FLEX hinge 12 pcs MPJ2515
280Ft
210Ft
Belépés/Login:
LOGIN

NEW Account
ShoppingCart more
0 items
Elérhetőségeink:
Packinfo:
Tel:+36-30-9210009
H-V: 10-18:00
Facebook
Languages
HungarianEnglish
Currencies
Notifications more
Notifications
Notify me of updates to .Corona 2.4ghz DIY(DSS) module
Specials more
AL2004 Main shaft stand for SJM400 V2
AL2004 Main shaft stand for SJM400 V2
1,969Ft
1,410Ft
AL1018 Horse link for SJM400
AL1018 Horse link for SJM400
344Ft
210Ft
Brushless Motor  84gr KV 2500 Outrunner Hacker A20-6XL 10-POL EVO TREX
Brushless Motor 84gr KV 2500 Outrunner Hacker A20-6XL 10-POL EVO TREX
22,947Ft
13,990Ft
TREX Tail Rotor Parts for T-REX 450 Series Helicopters HS1147
TREX Tail Rotor Parts for T-REX 450 Series Helicopters HS1147
1,613Ft
1,210Ft
Apc Pylon  6.5 x 5.0
Apc Pylon 6.5 x 5.0
1,490Ft
1,110Ft
Apc Slowflyer 12 x  6
Apc Slowflyer 12 x 6
1,500Ft
1,110Ft
Threaded Hexagon Socket Insert M4 bl 10pcs MPJ1135
Threaded Hexagon Socket Insert M4 bl 10pcs MPJ1135
1,346Ft
1,010Ft
TowerPro 8 x 3,8 Slowflyer légcsavar
TowerPro 8 x 3,8 Slowflyer légcsavar
946Ft
710Ft
Wheels adapter 4mmx5.5 (4qty)
Wheels adapter 4mmx5.5 (4qty)
146Ft
110Ft
Landing gear axle 6mm dia 2pcs MPJ2872
Landing gear axle 6mm dia 2pcs MPJ2872
546Ft
410Ft
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!

Copyright © 2018 RCPANDA MODELSPORT
Powered by osCommerce