Good Support!
  Top » Catalog » CarBrushlessMotor » RCPALT80A13,5ALT My Account  |  Cart Contents  |  Checkout |  LOGIN   
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Categories
!SAFE-PRODUCTS
Battery
BatteryAccessories (23)
BatteryCharger (43)
AutoAccessories-> (666)
Car (8)
CarBattery
CarBodys (11)
CarBrushlessMotor (20)
CarCombo (4)
CarESC (7)
CarTunning (15)
BEC RX REG (3)
CNC
Electromotor (21)
ElectromotorAccessories-> (215)
ELogger (15)
BoatAccessories-> (70)
BoatESC (8)
Boats
FPV-VideoTransmitters
AircraftESC (7)
Airplane-> (56)
NitroEnginesAccessories-> (90)
MULTICOPTERS
Helicopters (2)
HelicopterAccessories-> (431)
HelicopterESC (3)
HelicopterGyro (2)
HelicopterMotor (4)
HelicopterRotorblades (11)
Servo-> (102)
Accessories-> (492)
Fuel
Propellers-> (167)
Radio-> (28)
Receiver-> (264)
Simulators (8)
Vouchers
Specials more
10 Teeth Pinion Gear For 2mm Shaft
10 Teeth Pinion Gear For 2mm Shaft
590Ft
490Ft
Alu_Horn_Spline_Both_SKY
Alu_Horn_Spline_Both_SKY
1,290Ft
990Ft
Velcro 50mm x  5meter Yellow New
Velcro 50mm x 5meter Yellow New
6,500Ft
6,250Ft
FG2005 Gyro board for SJM400 V2
FG2005 Gyro board for SJM400 V2
413Ft
200Ft
BlueBird MicroCrystal 40Mhz 40.810 - 81ch
BlueBird MicroCrystal 40Mhz 40.810 - 81ch
2,000Ft
1,500Ft
JST MALE Connector with Metal pins
JST MALE Connector with Metal pins
350Ft
250Ft
SJ30004 Countersunk screws for SJM400
SJ30004 Countersunk screws for SJM400
413Ft
310Ft
Feigai Standard Crystal Set 40Mhz 40.785 - 59ch
Feigai Standard Crystal Set 40Mhz 40.785 - 59ch
2,000Ft
1,500Ft
Tell A Friend
 
Tell someone you know about this product.
ALTURN COMBO 80A/96A 2-3 Lipo ESC + 13,5T 3100KV ALTURN SENSORED Brushless Motor for 1/10 Cars 49,990Ft 44,990Ft
In stock

Motor Type: On Road
IFMAR Spec: YES
MOTOR Building Fan: YES
DESIGN: Sensored
SIZE: 540
TURN: 9.5T (13.5)
Resistance (Ri) Milli-ohms: 27
Input voltage (cell)2: 4-6cell
Watts: 165
KV3(Rpm/Volt): 3100
Shaft Diam (MM): 3.17mm Rotor Performs (ROM/temp): STD/STD
Hand Wound: YES
Thermal Protection: YES

1 Specification
1.1 Output: Continuous current 80A, burst current 96A.
1.2 Input: 2-3 cells LiPo. Note1
1.3 BEC Output: 6V/5A !!.
1.4 Resistance: 2x1.25 MOhm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 Suitable Brushless Motor: 9T and > 9T
1.5 Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race.
1.6 Size: 35mm(L) * 42mm(W) * 37mm(H).
1.7 Weight: 40g(Without wires)
Motor Specs:
Motor shaft: 3.17mm
Diameter: 35.8mm
Length: 50mm (excluding motor shaft)
Shaft length: 15mm
Weight: 167g

 
   
This product was added to our catalog on Wednesday 29 September, 2021.
Reviews


Customers who bought this product also purchased
Deans Plug Males 2
Deans Plug Males 2
413Ft
350Ft
FUTABA Servo Y Leads ultra light 30cm LC GOLD
FUTABA Servo Y Leads ultra light 30cm LC GOLD
1,090Ft
990Ft
Heat Shrink Tubing Assortment  29mm/45mm 1m Gold Orange transparent
Heat Shrink Tubing Assortment 29mm/45mm 1m Gold Orange transparent
413Ft
310Ft
Adaptor for Multiplex din
Adaptor for Multiplex din
2,010Ft
1,510Ft
Heat Shrink Tubing Assortment  42mm/70mm 1m Gold Orange transparent
Heat Shrink Tubing Assortment 42mm/70mm 1m Gold Orange transparent
413Ft
310Ft
Heat Shrink Tubing Assortment   4,0mm/2,0mm Red 1 meter
Heat Shrink Tubing Assortment 4,0mm/2,0mm Red 1 meter
280Ft
210Ft
ShoppingCart more
0 items
Notifications more
Notifications
Notify me of updates to ALTURN COMBO 80A/96A 2-3 Lipo ESC + 13,5T 3100KV ALTURN SENSORED Brushless Motor for 1/10 Cars
Specials more
BlueBird MicroCrystal 35Mhz 35.120 - 72ch
BlueBird MicroCrystal 35Mhz 35.120 - 72ch
2,000Ft
1,500Ft
SJ10005 Flange bearing 2 x 6 x 2,5 for SJM400
SJ10005 Flange bearing 2 x 6 x 2,5 for SJM400
2,490Ft
2,390Ft
AL2017 Main rotor head center for SJM400 V2
AL2017 Main rotor head center for SJM400 V2
3,115Ft
2,310Ft
12 Teeth Pinion Gear For 2mm Shaft
12 Teeth Pinion Gear For 2mm Shaft
590Ft
490Ft
Inch Series Ball Bearings W/Shield D 7.969 x d3.969 x B3.175 (1db)
Inch Series Ball Bearings W/Shield D 7.969 x d3.969 x B3.175 (1db)
490Ft
390Ft
FG1002 Horse linkage board for SJM400
FG1002 Horse linkage board for SJM400
547Ft
190Ft
AL2007 Horse (right) for SJM400 V2
AL2007 Horse (right) for SJM400 V2
1,865Ft
1,310Ft
Carbon Landing Gear 3000gr 1 half
Carbon Landing Gear 3000gr 1 half
4,947Ft
3,710Ft
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!
Copyright © 2024 RCPANDA MODELSPORT